GSOF message: Position Type Information
This message describes position time information. It contains the following data:
-
Position type information
-
Solution flags
-
RTK condition
-
Correction age
-
Network flags
NOTE – This record may grow in the future. Apps should be coded so that they do not have problems if a larger record is encountered.
Position Type (Type 38 record)
Field |
Item |
Type |
Value |
Meaning |
---|---|---|---|---|
0 |
Output record type |
Char |
38 |
Position time output record |
1 |
Record length |
Char |
varies |
Bytes in record |
2 to 5 |
RESERVED |
Char |
4 |
No longer utilized. |
6 |
Solution Flags |
Char |
|
Is a bitmap as follows: Bit 0: Solution is Wide Area/Network/VRS. |
7 |
RTK Condition |
Char |
Bits 0 to 3 values: |
|
8 to 11 |
Correction Age |
Float |
The time since the last differential measurement update in seconds. |
|
12 |
Network Flags |
Char |
Is a bitmap as follows: Bit 0: New physical base station available. Bit reset after next command GETBASE, 34h. Bit 2,1:
Bit 3: GeoFence option is enabled and unit is outside Geofence area. See also GeoFence, 4Bh RETOPT Bit 4: RTK Range limiting is enabled and unit is too far from the base (Range limit exceeded).
Bit 6: RTX position flag. 1 = RTX position, 0 = Not RTX position. Bit 7: RTX |
|
13 |
Network Flags2 |
|
NETWORK FLAGS2 contains extra positioning and status flags, bitmap as follows:
|
|
14 |
Frame Flag |
Char |
Bits 1, 0:
Bits 2–6: Reserved Bit 7: (Set) Additional Frame Flag byte follows. |
|
15 to 16 |
ITRF Epoch |
|
ITRF EPOCH is the date to use, expressed number of 1/100ths of a year since 1/1/2005. Signed Int so can extend before 2005. Value is ignored on input if a position is flagged as being Current Epoch realization (FRAME FLAG bits 0,1 = 0x01). It will be the current date on output if a position is flagged as Current Epoch. |
|
17 |
Tectonic Plate |
Char |
See Tectonic plates table. |
|
18 to 21 |
RTX STD SUB Minutes Left |
Long |
The number of minutes remaining for the hourly RTX RAM subscription: 0: Hourly subscription feature is not used |
|
22 |
Pole Wobble Status Flag |
Char |
Used when rover is in Static mode. In Kinematic mode, it is always false. In Static mode, when the pole is wobbled, this flag is set to true by RTK. |
|
23 to 26 |
Pole Wobble Distance |
Float |
Distance (meters). |
|
27 |
POSITION TYPE |
Char |
The receiver's internal designation for the type of position solution. See Position Fix Type table. |
Initialization Integrity
Meaning |
Bit 2 |
Bit 3 |
---|---|---|
Not checking |
Clear |
Clear |
Checking Initialization |
Set |
Clear |
Initialization Passed |
Clear |
Set |
Initialization Failed |
Set |
Set |
Tectonic plates
Refer to NNR-Morvel56 (http://www.geology.wisc.edu/~chuck/MORVEL/).
Field |
Plate name |
Field |
Plate name |
Field |
Plate name |
---|---|---|---|---|---|
0 |
Unknown |
20 |
Galapagos |
40 |
Pacific |
1 |
Aegean Sea |
21 |
India |
41 |
Panama |
2 |
Altiplano |
22 |
Juan de Fuca |
42 |
Philippine Sea |
3 |
Amurian |
23 |
Juan Fernandez |
43 |
Rivera |
4 |
Anatolia |
24 |
Kermadec |
44 |
Sandwich |
5 |
Antarctica |
25 |
Lwandle |
45 |
Scotia |
6 |
Arabia |
26 |
Macquarie |
46 |
Shetland |
7 |
Australia |
27 |
Manus |
47 |
Solomon Sea |
8 |
Balmoral Reef |
28 |
Maoke |
48 |
Somalia |
9 |
Banda Sea |
29 |
Mariana |
49 |
South America |
10 |
Birds Head |
30 |
Molucca Sea |
50 |
South Bismarck |
11 |
Burma |
31 |
Nazca |
51 |
Sunda |
12 |
Capricorn |
32 |
New Hebrides |
52 |
Sur |
13 |
Caribbean |
33 |
Niuafoou |
53 |
Timor |
14 |
Caroline |
34 |
North America |
54 |
Tonga |
15 |
Cocos |
35 |
North Andes |
55 |
Woodlark |
16 |
Conway Reef |
36 |
North Bismarck |
56 |
Yangtze |
17 |
Easter |
37 |
Nubia |
||
18 |
Eurasia |
38 |
Okhotsk |
||
19 |
Futuna |
39 |
Okinawa |
Position Fix Type
Field |
Plate name |
Field |
Plate name |
Field |
Plate name |
---|---|---|---|---|---|
0 |
No Fix or Old Position Fix |
20 |
LowLatency RTX |
40 |
Synchronous RTX-ViewPoint |
1 |
Full Measurement Autonomous |
21 |
OmniSTAR Multiple Source |
41 |
LowLatency RTX-FieldPoint |
2 |
Propagated Autonomous |
22 |
OmniSTAR L1-only |
42 |
Synchronous RTX-FieldPoint |
3 |
Full Differential SBAS |
23 |
INS Autonomous |
43 |
OmniSTAR G2+ solution type |
4 |
Propagated SBAS |
24 |
INS SBAS |
44 |
OmniSTAR G4+ solution type |
5 |
Full Differential |
25 |
INS code-phase DGNSS or Omnistar-VBS |
45 |
RESERVED |
6 |
Propagated Differential |
26 |
INS RTX code-phase corrections |
46 |
RESERVED |
7 |
Full Float RTK |
27 |
INS RTX carrier-phase corrections |
47 |
RESERVED |
8 |
Propagated Float RTK |
28 |
INS Omnistar HP/XP/G2 |
48 |
L1S SLAS |
9 |
Full Fixed-ambiguity RTK |
29 |
INS RTK (fixed or float) |
49 |
INS xFill-RTX |
10 |
Propagated Fixed-ambiguity RTK |
30 |
INS Dead-Reckoning |
50 |
CLAS |
11 |
Omnistar HP Differential |
31 |
RTX code-phase corrections |
51 |
INS CLAS |
12 |
Omnistar XP Differential |
32 |
RTX Fast in Sync mode |
||
13 |
Location-RTK (Dithered RTK) |
33 |
RTX Fast in Low Latency mode |
||
14 |
Omnistar VBS Differential |
34 |
RESERVED |
||
15 |
Beacon Differential |
35 |
RESERVED |
||
16 |
OmniSTAR HP/XP |
36 |
xFill-RTX |
||
17 |
OmniSTAR HP/G2 |
37 |
LowLatency RTX-RangePoint |
||
18 |
OmniSTAR G2 |
38 |
Synchronous RTX-RangePoint |
||
19 |
Synchronous RTX |
39 |
LowLatency RTX-ViewPoint |