Check for Firmware Upgrades

The receiver can automatically check for firmware upgrades from the Trimble website if the Enable option is selected (by default it is enabled).

If your network requires that you pass through a proxy server, you can configure the IP address of the server and the port through which the Internet is accessed from Network Configuration - Proxy.

Select Firmware / FW Upgrade Check.

 

You can manually check for firmware updates by clicking Check for new firmware now.

Update Available – This field is visible if there is a more recent firmware version than the receiver has installed. If the receiver is under warranty support, select the Firmware / Install option to open the Install New Firmware page.