Performance specifications

Applicable receivers:  BD982 | BX982

Feature

Specification

Measurements

  • Position antenna based on a 220-channel Maxwell 6 chip:

    • GPS: Simultaneous L1 C/A, L2E, L2C, L5

    • GLONASS: Simultaneous L1 C/A, L1 P, L2 C/A (GLONASS M Only), L2 P

    • SBAS: Simultaneous L1 C/A, L5

    • GALILEO: Simultaneous L1 BOC, E5A, E5B, E5AltBOC

    • BeiDou: Simultaneous B1, B2

    • QZSS: Simultaneous L1 C/A, L1 SAIF, L2C, L5

    • L-Band OmniSTAR VBS, HP, and XP

  • Vector antenna based on a second 220-channel Maxwell 6 chip:

    • GPS: Simultaneous L1 C/A, L2E, L2C

    • GLONASS: Simultaneous L1 C/A, L1 P, L2 C/A, L2 P

    • BeiDou: Simultaneous B1

  • Advanced Trimble Maxwell 6 Custom Survey GNSS technology

  • High-precision multiple correlator for GNSS pseudorange measurements

  • Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and high dynamic response

  • Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth

  • Signal-to-Noise ratios reported in dB-Hz

  • Proven Trimble low elevation tracking technology

Code differential GPS positioning accuracy 1

0.25 m + 1 ppm Horizontal
0.50 m + 1 ppm Vertical

SBAS accuracy 2

<5 m 3DRMS

RTK positioning accuracy
(<30 km)

Horizontal: ±(8 mm + 1 ppm) RMS
Vertical: ±(15 mm + 1 ppm) RMS
Heading: 2 m baseline <0.09°; 10 m baseline <0.05°

Initialization time

Typically, less than 10 seconds

Initialization reliability 3

Typically >99.9%

1 Accuracy and reliability may be subject to anomalies such as multipath, obstructions, satellite geometry, and atmospheric conditions. Always follow recommended practices.

2 Depends on WAAS, EGNOS, and MSAS system performance.

3 May be affected by atmospheric conditions, signal multipath, and satellite geometry. Initialization reliability is continuously monitored to ensure highest quality.