Receiver Reset

Applicable receivers:  All receivers

Select Receiver Configuration / Reset.

 

Reboot Receiver – Select this option to restart the receiver. All data and settings are kept.

Shut Down – On the receiver, you can select this option to turn off the receiver.

Use Default Application file – Select this option to reset the receiver to its factory default settings. The satellite ephemeris and almanac data and all logged data files are kept. The receiver does not restart.

Clear Satellite Data – The satellite ephemeris and almanac data is cleared, and the receiver restarts. On the receiver, this field is shown as Reset Satellite Data.

Clear Application Files – Select this option to reset the receiver to its factory default settings and clear any application files resident in non-volatile memory. The receiver restarts. All Ethernet network settings are kept and satellite ephemeris and almanac data is preserved.

Clear All Receiver Settings – Select this option for the receiver to perform the three operations above and also clear all Ethernet network settings. The receiver restarts. On the receiver, this field is shown as Clear Settings.

Clear Admin Password – Clear the administrator password. If you do this, you must use the serial number of the receiver as the password to log in after the reset when accessing this device over the internet.

AutoReboot Timer – Indicates the receiver can restart at given times specified by the reboot settings. The AutoReboot Timer also provides a method to recover from the unlikely occurrence that the receiver cannot communicate without a forced system restart.