QZSS SV enable/disable record
The QZSS SV enable/disable record is used to enable or disable a selection of the five QZSS satellites. By default, the receiver is configured to use all satellites that are in good health. This record is useful for enabling satellites that are not in good health. Once enabled, the health condition of the satellite(s) are ignored, and the QZSS signal transmissions from the satellite(s) are considered when computing position solutions.
The following table shows the additional records provided when the QZSS SV enable/disable record is included with Command Packet 64h.
|
Byte |
Item |
Type |
Value |
Notes |
|---|---|---|---|---|
|
0 |
RECORD TYPE |
1 (Char) |
5Fh |
QZSS SV Enable/Disable Record. |
|
1 |
RECORD LENGTH |
1 (Char) |
05h |
Number of bytes in record, excluding bytes 0 and 1. |
|
2–6 |
QZSS SV ENABLE/DISABLE STATES |
5 (Chars) |
Array of Enable/Disable flags for the 5 SVs. The first byte sets the required Enable/Disable status of SV1, the second sets the status of SV2, etc. |
The following table provides byte values for the information in the QZSS SV enable/disable record.
QZSS SV enable/disable states flag values
|
Byte value |
Notes |
|
|---|---|---|
|
Dec |
Hex |
|
|
0 |
00h |
Heed health (default) |
|
1 |
01h |
Disable the satellite |
|
2 |
02h |
Enable the satellite regardless of whether the satellite is in good or bad health |