BX982 features

Applicable receivers:  BX982

The receiver has the following features:

  • Position antenna based a on 220-channel Trimble Maxwell™ 6 chip:

    • GPS: Simultaneous L1 C/A, L2E, L2C, L5

    • GLONASS: Simultaneous L1 C/A, L1 P, L2 C/A L2 P

    • SBAS: Simultaneous L1 C/A, L5

    • GALILEO: Simultaneous L1 BOC, E5A, E5B, E5AltBOC

    • BeiDou: Simultaneous B1, B2

    • QZSS: Simultaneous L1 C/A, L1 SAIF, L2C, L5

    • L-Band OmniSTAR VBS, HP, and XP

  • Vector antenna based on a second 220-channel Maxwell 6 chip:

    • GPS: Simultaneous L1 C/A, L2E, L2C

    • GLONASS: Simultaneous L1 C/A, L1 P, L2 C/A, L2 P

    • BeiDou: Simultaneous B1

  • Advanced Trimble Maxwell 6 Custom Survey GNSS technology

  • Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth

  • Proven Trimble low elevation tracking technology

  • 1 USB port

  • 1 CAN port

  • 1 LAN Ethernet port:

    • Supports links to 10BaseT/100BaseT networks

    • All functions are performed through a single IP address simultaneously—including web interface access and raw data streaming

  • Network Protocols supported:

    • HTTP (web interface)

    • NTP Server

    • NMEA, GSOF, CMR over TCP/IP or UDP

    • NTripCaster, NTripServer, NTripClient

    • mDNS/UPnP Service discovery

    • Dynamic DNS

    • Email alerts

    • Network link to Google Earth

    • Support for external modems through PPP

  • 3 × RS-232 ports (baud rates up to 460,800)

  • 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20, and 50 Hz positioning and heading outputs (depending on the installed option)

  • Up to 50 Hz raw measurement and position outputs

  • Correction inputs/outputs: CMR, CMR+™, sCMRx, RTCM 2.1, 2.2, 2.3, 2.4, 3.X, and 3.2.

    NOTES –  

    • The functionality to input or output any of these corrections depends on the installed options.

    • Different manufacturers may have established different packet structures for their correction messages. Thus, Trimble OEM GNSS receivers may not receive corrections from other manufacturers' receivers, and other manufacturers' receivers may not be able to receive corrections from Trimble OEM GNSS receivers.

  • Navigation outputs:

    • ASCII: NMEA-0183: GBS; GGA; GLL; GNS; GRS; GSA; GST; GSV; HDT; LLQ; PTNL,AVR; PTNL,BPQ; PTNL,DG; PFUGDP; DTM; PTNL,GGK; PTNL,PJK; PTNL,PJT, PTNL,VGK; PTNL,VHD; RMC; ROT; VTG; ZDA.

    • Binary: Trimble GSOF

  • Control software: HTML Web browser (Google Chrome (recommended), Internet Explorer®, Mozilla Firefox, Apple Safari, Opera)

  • 1 pulse-per-second (1PPS) output

  • LED drive support