Ethernet
Applicable receivers: | BD1090 | BD1092 | BD1092i
The receiver contains the ethernet MAC and PHY, but requires external magnetics. The PHY layer is based on the Micrel KSZ9031RNX. These are set to default to 100 Mbps, full duplex with auto-negotiation enabled. The PHY layer is based on the Micrel KSZ8041NLI; it is set to default to 100 Mbps, full duplex with auto-negotiation enabled.
Isolation transformer selection
|
Parameters |
Value |
Test condition |
|---|---|---|
|
Turns ratio |
1CT:1CT |
|
|
Open-circuit inductance (min.) |
350 uH |
100 mV, 100 kHz, 8 mA |
|
Leakage inductance (max.) |
0.4 uH |
1 MHz (min.) |
|
DC resistance (max.) |
0.9 Ohms |
|
|
Insertion loss (max.) |
1.0 dB |
0 MHz to 65 MHz |
|
HiPot (min. |
1500 Vrms |
|
