Receiver status byte

Applicable receivers:  All receivers

The status byte contains indicators regarding the receiver’s operational status. When sending a packet to the receiver this byte should be left as 00h, since the receiver does not interpret the incoming status byte. When receiving a packet from the receiver, the status byte may be decoded to determine the receiver’s operational status. The following table lists the status byte codes.

Bit	Notes
Bit 0	Reserved
Bit 1	If set, low battery at the base station
Bit 2	Reserved
Bit 3	If set, receiver's kinematic state is currently set to 'Roving', otherwise 'static'
Bit 4–7	Reserved